KGN

ANV 5 Series Needle Valve

Features

  • KGN Needle valve is a air operated valve. Valve is on when pressure is over 0.39MPa and off by a built-in spring.
  • Using with dispense controller and pressure tank, the shot volume can be controlled to a very small amount by adjusting
    the material delivery pressure and the valve opening time. This valve is suitable for middle to high viscosity materials dispensing.
Contact usto order

Specifications

Features

  • KGN Needle valve is a air operated valve. Valve is on when pressure is over 0.39MPa and off by a built-in spring.
  • Using with dispense controller and pressure tank, the shot volume can be controlled to a very small amount by adjusting
    the material delivery pressure and the valve opening time. This valve is suitable for middle to high viscosity materials dispensing.

Specifications

ANV 5 Series (Air Operated) Needle  Valve

 

 Valve modeANV502ANV512  ANV503
 Valve structureNeedle valve
 Minimum shot 0.01 c.c
 Fluid flow (Max.)2600 c.c/min3100 c.c/min
 Viscosity~300Pa.s(~300,000cps)
 Wetted parts material  SUS304   POMSUS304
 Diaphragm material
PTFE
 Material inlet(Max.)   0.49MPa(5.0kgf/cm2)
 Material port dimensionØ7.0mm, 牙孔Rc1/8(PT1/8)
 Operating cycle (Max.)150 cycles/min.
 Dispensing pressure 0.39~0.69MPa(4.0~7.0 kgf/cm2)
 Weight130g90g125g

*The minimum shot volume depends on the dimension of valve needle.
*Volume(c.c/min):0.1Mpa/min water testing result.


Tags:

Related products